Now showing items 1-20 of 151

    • Thumbnail

      Biomaterial for dentistry applications 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ณฐวัฒน์ กาญจนวลีกุล (Silpakorn University, 12/6/2020)
      This research is a study of alternative materials for temporary dental crowns made from biodegradable polymer, which are molded using 3D printing. Polylactic acid was reinforced with aluminum oxide powder treated surface ...
    • Thumbnail

      Development of antibacterial food packaging films from polymer blend between poly(butylene succinate) and poly(butylene adipate-co-terephthalate) 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ณัฐกานต์ ยังชีพยืนอยู่ดี (Silpakorn University, 17/8/2018)
      This research aimed to study the preparation of antibacterial food packaging films from polymer blends between PBS/PBAT with and without peroxide as a reaction initiator then coated with chitosan or zinc oxide. In part 1, ...
    • Thumbnail

      DEVELOPMENT OF BIOFOAM FROM WHEAT GLUTEN AND WHEAT STARCH BLEND FOR FOOD PACKAGING 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ปุณนกิจ นาคราช (Silpakorn University, 12/7/2019)
      Biofoams based on wheat gluten and wheat starch were fabricated by thermal compression molding to replace petroleum-based polymer foams, especially polystyrene paper foam (PSP foam) used as food packaging trays. This ...
    • Thumbnail

      Development of food packaging films from poly(butylene succinate) coating with microcrystalline cellulose 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ณัชชา ก๊กเครือ (Silpakorn University, 17/8/2018)
      The objective of this work was to develop gas barrier properties of food packaging films which were biodegradable polymer. The food packaging films were prepared from poly(butylene succinate); PBS films coated with ...
    • Thumbnail

      Effect of nanofiller on in-situ fibrillation of dispersed PE phase in PLA blend. 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ชัยวัฒน์ ทิพย์ภูวนันท์ (Silpakorn University, 2/1/2019)
      This research is aimed to improve ductility of PLA by blending with PE containing different branched structures which are HDPE, LLDPE and LDPE. The films of PLA/PE with various contents of PE at 5-30 % by weight were ...
    • Thumbnail

      Effect of NR, NBR composition and nanofiller on BR foaming. 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ชินวินท์ แก้วนะ (Silpakorn University, 17/8/2018)
      Blend of NR and BR is high flexibility and abrasion resistance. Nevertheless, NR/BR blend has some drawbacks such as poor non-polar solvent resistance. NBR compound has an excellent resistance to non-polar oils. Foam ...
    • Thumbnail

      Green Preparation of Polymer/Reduced Graphene Oxide Electrodes for Multicolor Electrochromic Devices   

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ชื่นกมล รัตนพันธ์ (Silpakorn University, 10/7/2020)
      Electrochromic devices are very popular in their applications regarding electronic display screens that can change colors. The electrodes of devices are made of the glass coated metal materials which is expensive and low ...
    • Thumbnail

      Improvement of mechanical properties and investigation of thermal stability of PHBV with bio-polymer blend and polymer composite method 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      พงศกร นุชนงค์ (Silpakorn University, 2/7/2021)
      Poly(hydroxybutylate-co-hydroxyvalerate (PHBV) possesses good mechanical properties. However, this polymer has limitations such as narrow processing window and low impact resistance. Therefore, in this research thermal ...
    • Thumbnail

      Morphology and mechanical properties ofbacterial cellulose/modified natural rubber blend 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ทนงศักดิ์ กันตุ่น (Silpakorn University, 12/7/2019)
      The aim of this research is to improve the elasticity of bacterial cellulose with natural rubber and modified natural rubber. Dextrin-grafted epoxidized natural rubber (ENR-Dex) was obtained by grafting dextrin onto ENR. ...
    • Thumbnail

      Polybutylene succinate porous scaffold prepared by fused deposition modeling and salt leaching techniques for drug delivery application 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      กษิดิศ ตีระสุชัย (Silpakorn University, 18/6/2021)
      A scaffold is a biomedical appliance for tissue restoration that can be used to achieve drug delivery purposes. The objective of this research was to prepare polybutylene succinate scaffolds fabricated by fused deposition ...
    • Thumbnail

      Preparation and characterization of bio - foam from polymer blends of polylactic acid and polybutylene succinate 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      วสุธร บัวเหลือง (Silpakorn University, 18/6/2021)
      Nowadays, plastics are widely used but they are non-biodegradable plastics which have been caused serious environmental pollutions due to the degradability issue, especially consumable food packaging. In this research, ...
    • Thumbnail

      Preparation and characterization of poly(butylene adipate-co-terephthalate) biocomposites films for extended shelf-life of fruits 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ณัฐนรี อาศนสุวรรณ์ (Silpakorn University, 2/7/2021)
      Nowadays, packagings are widely used in post-harvest agro industry which subsequently caused the environmental problems due to it is not biodegradable. In this research, biodegradable materials i.e., Polybutylene ...
    • Thumbnail

      Preparation and characterization of ternary blend of thermoplastic starch/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(vinyl alcohol) 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      อิสรีย์ พวงมะลิ (Silpakorn University, 2/7/2021)
      This research aims to study the preparation of thermoplastic starch (TPS)/polyvinyl alcohol (PVOH) blend with the reactive agent as Joncryl® ADR-4300 and Dicumyl peroxide by adding poly(hydroxybutyrate-co-hydroxyvalerate) ...
    • Thumbnail

      Preparation and properties of bacterial cellulose reinforced poly(lactic acid) composites  

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      หนึ่งฤทัย เปรมนิ่ม (Silpakorn University, 12/7/2019)
      This research is aimed to study the influence of silane modified bacterial cellulose surface and the addition of bacterial cellulose on the morphology, mechanical and thermal properties and water absorption of Poly(lactic ...
    • Thumbnail

      PREPARATION AND PROPERTIES OF HOLLOW GLASS MICROSPHERES REINFORCED POLYAMIDE 11 COMPOSITES 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ธณิศา แสร์ภู่ (Silpakorn University, 2/1/2019)
      This research aimed to study the preparation of silane treated hollow glass microspheres (HGMs) reinforced polyamide 11 (PA11) composites, which the research was divided into two parts. The first part studied effect of ...
    • Thumbnail

      Preparation of polymer composite from biodegradable polymers and coffee bean waste for agriculture application 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      กฤติน บ่อแก้ว (Silpakorn University, 17/8/2018)
      This research was aimed to study feasibility to improve properties of PBS to be suitable for agriculture application. The study was divided into two parts. The first part was performed to improve properties of PBS by ...
    • Thumbnail

      Preparation of thermoplastic elastomer from natural rubber and  polycaprolactone blend 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ธีรภัทร ตันประเสริฐ (Silpakorn University, 12/7/2019)
      This research was aimed to study properties of NR/PCL blend to be applied for thermoplastic elastomer. The study was divided into 3 parts. The first part was performed to improve compatibility of NR/PCL by adding difference ...
    • Thumbnail

      Preparation of thermoplastic vulcanizates from natural rubber and poly(butylene adipate-co-terephthalate) blends 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ขวัญชัย บวกสันเทียะ (Silpakorn University, 12/7/2019)
      The aim of this research was to study PBAT/NR blends, dynamic vulcanizates blends and TPV/organoclay based on the blends of PBAT/NR. In this research, PBAT was mixed with NR in an internal mixer machine to obtain the blends. ...
    • Thumbnail

      Properties of polymer blends between poly(lactic acid) and polyamide11 

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      ศิรประภา แทบทาม (Silpakorn University, 12/7/2019)
      Poly(lactic acid) (PLA) is a biodegradable polymer but it is brittle polymer. This drawback could be resolved by blending PLA with tougher polymers. Polyamide 11 (PA11) is a bio-based polymer that has high toughness. The ...
    • Thumbnail

      Reactive blending of Poly(lactic acid) and Thermoplastic starch  

      Collection: Theses (Master's degree) - Polymer Science and Engineering / วิทยานิพนธ์ - วิทยาการและวิศวกรรมพอลิเมอร์
      Type: Thesis
      กิตวรา โตคูเวียง (Silpakorn University, 12/6/2020)
      The polymer blend between Poly(lactic acid) (PLA) and Thermoplastic starch (TPS) is problematic due to their incompatibility resulted from the difference between polarity and viscosity. Therefore, in the work, the viscosity ...


      Copyright  ©  2021 Silpakorn University Central Library All Rights Reserved.
      Theme by 
      Atmire NV